Roger Technology rampa BIONIK BRUSHLESS
Roger Technology
Rampa BIONIK
BRUSHLESS
Brushless Bionik 8 m super intenzivna rampa ima brklju do 8 m i ugrađenu digitalnu upravljačku ploču s ugrađenim enkoderom. Koristimo Brushless tehnologiju jer je robustna i elegantna, za pristup privatnim, poslovnim prostorima, industrijskim mjestima i stambenim područjima.
BIONIK rampe su BRUSHLESS tehnologije i savršena je za velika područja s kontroliranim pristupom sa rasponom do 8 m brklje.
Bionik je model ulazne barijere tvrtke Roger Technology s digitalnom upravljanjem, i BRUSHLESS motorom 36V s trajnim magnetskim poljem. Bionik kučište i zaštitna ruka izrađeni su od lijevanog aluminija, izravno spojeni s reduktorom preko posebnog sustava za pred-smanjenje mehaničkoga naprezanja mehaničkoga kretanja brklje i kontinuirano prateći sve položaje pomoću enkodera.
Revolucionarni BRUSHLESS trofazni motor omogućuje neograničeno korištenje rampe i ima izuzetno nisku potrošnju energije. Motor zupčanika je mehanički dragulj izrađen u cijelosti od aluminija, čelika i bronce. Svi spiralni zupčanici su izrezani s nagibom od 15°, sastavljeni na najkvalitetnijim ležajevima i umetnuti u savršeno obrađena sjedala kako bi se zajamčila apsolutna preciznost osovina zupčanika.
Komplet rampe BIONIK sadrži kućište / motor, oprugu, prijemnik, dva daljinska upravljača i par fotoćelija. Brklja i oprema dolazi odvojeno. Kao i uvijek arsenal pribora iz rasvjetnih kompleta, AL zavjese i potpore…. potražite u PDF brošuri ili nas kontaktirajte.
- BI/004 – automatska rampa od 3 do 4 m
- BI/004HP – automatska rampa do 4 m – za super intenzivnu upotrebu
- BI/004HP/IS – automatska rampa do 4 m – za super intenzivnu upotrebu i kućištem od brušenog nehrđajućeg čelika AISI 304
- BI/006 – automatska rampa do 6 m – za super intenzivnu upotrebu
- BI/006/IS – automatska rampa do 6 m – za super intenzivnu upotrebu i kućištem od brušenog nehrđajućeg čelika AISI 304
- BI/001PE – automatska rampa do 3 m – VISOKA BRZINA za super intenzivnu upotrebu
- BI/001PC – automatska rampa do 3 m – VISOKA BRZINA za super intenzivnu upotrebu sa cilindričnom polugom AG/BC3/01.
- BI/008 – automatska rampa do 8 m
Galerija
Video
BI/004
| Barriers: | Up to 4 m long |
| Power line supply: | 230V AC – 50Hz |
| Motor power supply: | 36V DC |
| Electrical absorption: | 0 – 15A |
| Power rating: | 220W |
| Frequency of use: | Continue |
| Torque: | 10 – 200 N m |
| Operating temperature: | – 20 + 55 C° |
| Protection level: | IP54 |
| Reductor Type: | Irreversible |
| Opening time at 90°: | 2÷6 sec (up to 3 m) – 3÷6 sec (up to 4 m) |
| Onboard control unit: | CTRL Digital Controller 36V DC |
| Encoder: | Digital native encoder + magnetic digital SENSORED, 4096 PPR |
| Accessories power supply: | 24V DC |
| Release system: | STANDARD Key cylinder – Optional European Cylinder (Cod. RL670) |
| Batteries recovery: | Available (optional) |
| BUS synchronization Master/Slave: | Yes |
| Operating cycles per day (opening/closing – 24 hours no stop): | 5000 cycles |
| Maximum dimension product in mm (L x W x H): | 280 x 210 x 1203 |
| Product weight packed (Kg): | 47,5 |
| Number items per pallet: | 8 |
BI/004HP
| Barriers: | Up to 4 m long |
| Power line supply: | 230V AC – 50Hz |
| Motor power supply: | 36V DC |
| Electrical absorption: | max 15A |
| Power rating: | 220W |
| Frequency of use: | Super intensive use |
| Torque: | 10 – 200 N m |
| Operating temperature: | – 20 + 55 C° |
| Protection level: | IP54 |
| Reductor Type: | Irreversible |
| Opening time at 90°: | 3 ÷ 6 (sec) |
| Onboard control unit: | CTRL Digital Controller 36V DC |
| Encoder: | Digital native encoder + magnetic digital SENSORED, 4096 PPR |
| Accessories power supply: | 24V DC |
| Release system: | European Key cylinder |
| Batteries recovery: | Available (optional) |
| BUS synchronization Master/Slave: | Yes |
| Operating cycles per day (opening/closing – 24 hours no stop): | 5000 cycles |
| Maximum dimension product in mm (L x W x H): | 380 x 270 x 1237 |
| Product weight packed (Kg): | 72 |
| Number items per pallet: | 6 |
BI/006
| Barriers: | Up to 6 m long |
| Power line supply: | 230V AC – 50Hz |
| Motor power supply: | 36V DC |
| Electrical absorption: | max 15A |
| Power rating: | 220W |
| Frequency of use: | Super intensive use |
| Torque: | 10 – 300 N m |
| Operating temperature: | – 20 + 55 C° |
| Protection level: | IP54 |
| Reductor Type: | Irreversible |
| Opening time at 90°: | 4 ÷ 8 (sec) |
| Onboard control unit: | CTRL Digital Controller 36V DC |
| Encoder: | Digital native encoder + magnetic digital SENSORED, 4096 PPR |
| Accessories power supply: | 24V DC |
| Release system: | European Key cylinder |
| Batteries recovery: | Available (optional) |
| BUS synchronization Master/Slave: | Yes |
| Operating cycles per day (opening/closing – 24 hours no stop): | 4000 cycles |
| Maximum dimension product in mm (L x W x H): | 380 x 270 x 1237 |
| Product weight packed (Kg): | 74 |
| Number items per pallet: | 6 |
BI/008
| Barriers: | Up to 8 m long |
| Power line supply: | 230V AC – 50Hz |
| Motor power supply: | 36V DC |
| Electrical absorption: | max 18A |
| Power rating: | 300W |
| Frequency of use: | Super intensive use |
| Torque: | 10 – 400 N m |
| Operating temperature: | – 20 + 55 C° |
| Protection level: | IP54 |
| Reductor Type: | Irreversible |
| Opening time at 90°: | 10 ÷ 18 (sec) |
| Onboard control unit: | CTRL Digital Controller 36V DC |
| Encoder: | Digital native encoder + magnetic digital SENSORED, 4096 PPR |
| Accessories power supply: | 24V DC |
| Release system: | European Key cylinder |
| Batteries recovery: | Available (optional) |
| BUS synchronization Master/Slave: | Yes |
| Operating cycles per day (opening/closing – 24 hours no stop): | 2500 cycles |
| Maximum dimension product in mm (L x W x H): | 500 x 270 x 1237 |
| Product weight packed (Kg): | 95 |
| Number items per pallet: | 4 |
BI/001PE
| Barriers: | Up to 3 m long |
| Power line supply: | 230V AC – 50Hz |
| Motor power supply: | 36V DC |
| Electrical absorption: | max 15A |
| Power rating: | 450W |
| Frequency of use: | Super intensive use |
| Torque: | 10 – 200 N m |
| Operating temperature: | – 20 + 55 C° |
| Protection level: | IP54 |
| Reductor Type: | Irreversible |
| Opening time at 90°: | 2 ÷ 4 (sec) |
| Onboard control unit: | CTRL/P Digital Controller 36V DC |
| Encoder: | Digital native encoder + magnetic digital SENSORED, 4096 PPR |
| Accessories power supply: | 24V DC |
| Release system: | European Key cylinder |
| Batteries recovery: | Available (optional) |
| BUS synchronization Master/Slave: | No |
| Operating cycles per day (opening/closing – 24 hours no stop): | 8000 cycles |
| Maximum dimension product in mm (L x W x H): | 380 x 270 x 1237 |
| Product weight packed (Kg): | 72 |
| Number items per pallet: | 6 |
BI/001PC
| Barriers: | Up to 3 m long |
| Power line supply: | 230V AC – 50Hz |
| Motor power supply: | 36V DC |
| Electrical absorption: | max 15A |
| Power rating: | 450W |
| Frequency of use: | Continue |
| Torque: | 10 – 200 N m |
| Operating temperature: | – 20 + 55 C° |
| Protection level: | IP54 |
| Reductor Type: | Irreversible |
| Opening time at 90°: | 1,2 ÷ 3 (sec) |
| Onboard control unit: | CTRL/P Digital Controller 36V DC |
| Encoder: | Digital native encoder + magnetic digital SENSORED, 4096 PPR |
| Accessories power supply: | 24V DC |
| Release system: | European Key cylinder |
| Batteries recovery: | Available (optional) |
| BUS synchronization Master/Slave: | No |
| Operating cycles per day (opening/closing – 24 hours no stop): | 12000 cycles |
| Maximum dimension product in mm (L x W x H): | 380 x 270 x 1237 |
| Product weight packed (Kg): | 87,6 |
| Number items per pallet: | 6 |
KT244
Fixing plate with stay bolts and screws for BI/008.
ALED/8C
Luminous led cord of 8 meters with connectiom cable for boom arms.
BAMS/01
Mobile support for bars.
BAFS/01
Fixed support for bars.
BAFS/02
Fixing support, adjustable.
BAFS/03
Fixing support with bolt predisposition for bars.
BAFS/04
Fixing support adjustable, with bolt predisposition for bars.
BAFS/05
Adjustable fixed end rest for barriers of the ranges with magnetic suction cup.
R99/BASB20
Pack of 20 stickers for barrier.
R99/BASB40
Pack of 40 stickers for barrier.
BARK/02
Barrier skirting in aluminum, with stainless steel screws mounted on bronze bushings. Single module of length 2 meters.
BT12V45
Pair of batteries 12V 4.5 Ah.
DLD1/24
Loop detector for 1 loop, 2 output, 24V AC/DC.
DLD2/24
Loop detector for 2 loop, 2 output + output alarm, 24V AC/DC.
BI/BAT/KIT
Kit for emergency batteries charger for brushless digital controller CTRL 36V DC with plug-in card, with 2 recovery batteries 12V DC, 4.5 Ah. Kit for BIONIK barrier.
BI/BCHP
Plug-in card, batteries charger, for brushless digital controller CTRL 36V DC, without recovery batteries, for BIONIK barrier.
KT239
Kit DIN rail with magnetic support.
BAMS/01/EXT
Extension 20cm for mobile support BAMS/01.
B73/EXP
Signal status board, 2 output for CTRL – CTRL/P
KT242
Cable passage kit, with magnetic support, for barriers.
CRA/BAR
Post for photocells G90/F2ES – G90/F4ES – for spaced installation on a barrier cabinet (+23cm).
SP/85/AS/02
Assembly 2 spring diameter 85 mm for barriers.
BA/128/4
White painted aluminum rod, 4 meters long, with LED cover profile and impact resisteng rubber profile.
JNT/BA/128
Internal boom bar joint in anodized aluminum including fixing screws for bars BA/128.
BI/004
| Barriers: Up to 4 m long |
| Power line supply: 230V AC – 50Hz |
| Motor power supply: 36V DC |
| Electrical absorption: 0 – 15A |
| Power rating: 220W |
| Frequency of use: Continue |
| Torque: 10 – 200 N m |
| Operating temperature: – 20 + 55 C° |
| Protection level: IP54 |
| Reductor Type: Irreversible |
| Opening time at 90°: 2÷6 sec (up to 3 m) – 3÷6 sec (up to 4 m) |
| Onboard control unit: CTRL Digital Controller 36V DC |
| Encoder: Digital native encoder + magnetic digital SENSORED, 4096 PPR |
| Accessories power supply: 24V DC |
| Release system: STANDARD Key cylinder – Optional European Cylinder (Cod. RL670) |
| Batteries recovery: Available (optional) |
| BUS synchronization Master/Slave: Yes |
| Operating cycles per day (opening/closing – 24 hours no stop): 5000 cycles |
| Maximum dimension product in mm (L x W x H): 280 x 210 x 1203 |
| Product weight packed (kg): 47,5 |
| Number items per pallet: 8 |
BI/004HP
| Barriers: Up to 4 m long |
| Power line supply: 230V AC – 50Hz |
| Motor power supply: 36V DC |
| Electrical absorption: max 15A |
| Power rating: 220W |
| Frequency of use: Super intensive use |
| Torque: 10 – 200 N m |
| Operating temperature: – 20 + 55 C° |
| Protection level: IP54 |
| Reductor Type: Irreversible |
| Opening time at 90°: 3 ÷ 6 (sec) |
| Onboard control unit: CTRL Digital Controller 36V DC |
| Encoder: Digital native encoder + magnetic digital SENSORED, 4096 PPR |
| Accessories power supply: 24V DC |
| Release system: European Key cylinder |
| Batteries recovery: Available (optional) |
| BUS synchronization Master/Slave: Yes |
| Operating cycles per day (opening/closing – 24 hours no stop): 5000 cycles |
| Maximum dimension product in mm (L x W x H): 380 x 270 x 1237 |
| Product weight packed (kg): 72 |
| Number items per pallet: 6 |
BI/006
| Barriers: Up to 6 m long |
| Power line supply: 230V AC – 50Hz |
| Motor power supply: 36V DC |
| Electrical absorption: max 15A |
| Power rating: 220W |
| Frequency of use: Super intensive use |
| Torque: 10 – 300 N m |
| Operating temperature: – 20 + 55 C° |
| Protection level: IP54 |
| Reductor Type: Irreversible |
| Opening time at 90°: 4 ÷ 8 (sec) |
| Onboard control unit: CTRL Digital Controller 36V DC |
| Encoder: Digital native encoder + magnetic digital SENSORED, 4096 PPR |
| Accessories power supply: 24V DC |
| Release system: European Key cylinder |
| Batteries recovery: Available (optional) |
| BUS synchronization Master/Slave: Yes |
| Operating cycles per day (opening/closing – 24 hours no stop): 4000 cycles |
| Maximum dimension product in mm (L x W x H): 380 x 270 x 1237 |
| Product weight packed (kg): 74 |
| Number items per pallet: 6 |
BI/008
| Barriers: Up to 8 m long |
| Power line supply: 230V AC – 50Hz |
| Motor power supply: 36V DC |
| Electrical absorption: max 18A |
| Power rating: 300W |
| Frequency of use: Super intensive use |
| Torque: 10 – 400 N m |
| Operating temperature: – 20 + 55 C° |
| Protection level: IP54 |
| Reductor Type: Irreversible |
| Opening time at 90°: 10 ÷ 18 (sec) |
| Onboard control unit: CTRL Digital Controller 36V DC |
| Encoder: Digital native encoder + magnetic digital SENSORED, 4096 PPR |
| Accessories power supply: 24V DC |
| Release system: European Key cylinder |
| Batteries recovery: Available (optional) |
| BUS synchronization Master/Slave: Yes |
| Operating cycles per day (opening/closing – 24 hours no stop): 2500 cycles |
| Maximum dimension product in mm (L x W x H): 500 x 270 x 1237 |
| Product weight packed (kg): 95 |
| Number items per pallet: 4 |
BI/001PE
| Barriers: Up to 3 m long |
| Power line supply: 230V AC – 50Hz |
| Motor power supply: 36V DC |
| Electrical absorption: max 15A |
| Power rating: 450W |
| Frequency of use: Super intensive use |
| Torque: 10 – 200 N m |
| Operating temperature: – 20 + 55 C° |
| Protection level: IP54 |
| Reductor Type: Irreversible |
| Opening time at 90°: 2 ÷ 4 (sec) |
| Onboard control unit: CTRL/P Digital Controller 36V DC |
| Encoder: Digital native encoder + magnetic digital SENSORED, 4096 PPR |
| Accessories power supply: 24V DC |
| Release system: European Key cylinder |
| Batteries recovery: Available (optional) |
| BUS synchronization Master/Slave: No |
| Operating cycles per day (opening/closing – 24 hours no stop): 8000 cycles |
| Maximum dimension product in mm (L x W x H): 380 x 270 x 1237 |
| Product weight packed (kg): 72 |
| Number items per pallet: 6 |
BI/001PC
| Barriers: Up to 3 m long |
| Power line supply: 230V AC – 50Hz |
| Motor power supply: 36V DC |
| Electrical absorption: max 15A |
| Power rating: 450W |
| Frequency of use: Continue |
| Torque: 10 – 200 N m |
| Operating temperature: – 20 + 55 C° |
| Protection level: IP54 |
| Reductor Type: Irreversible |
| Opening time at 90°: 1,2 ÷ 3 (sec) |
| Onboard control unit: >CTRL/P Digital Controller 36V DC |
| Encoder: Digital native encoder + magnetic digital SENSORED, 4096 PPR |
| Accessories power supply: 24V DC |
| Release system: European Key cylinder |
| Batteries recovery: Available (optional) |
| BUS synchronization Master/Slave: No |
| Operating cycles per day (opening/closing – 24 hours no stop): 12000 cycles |
| Maximum dimension product in mm (L x W x H): 380 x 270 x 1237 |
| Product weight packed (kg): 87,6 |
| Number items per pallet: 6 |
KT244
Fixing plate with stay bolts and screws for BI/008.
ALED/8C
Luminous led cord of 8 meters with connectiom cable for boom arms.
BAMS/01
Mobile support for bars.
BAFS/01
Fixed support for bars.
BAFS/02
Fixing support, adjustable.
BAFS/03
Fixing support with bolt predisposition for bars.
BAFS/04
Fixing support adjustable, with bolt predisposition for bars.
BAFS/05
Adjustable fixed end rest for barriers of the ranges with magnetic suction cup.
R99/BASB20
Pack of 20 stickers for barrier.
R99/BASB40
Pack of 40 stickers for barrier.
BARK/02
Barrier skirting in aluminum, with stainless steel screws mounted on bronze bushings. Single module of length 2 meters.
BT12V45
Pair of batteries 12V 4.5 Ah.
DLD1/24
Loop detector for 1 loop, 2 output, 24V AC/DC.
DLD2/24
Loop detector for 2 loop, 2 output + output alarm, 24V AC/DC.
BI/BAT/KIT
Kit for emergency batteries charger for brushless digital controller CTRL 36V DC with plug-in card, with 2 recovery batteries 12V DC, 4.5 Ah. Kit for BIONIK barrier.
BI/BCHP
Plug-in card, batteries charger, for brushless digital controller CTRL 36V DC, without recovery batteries, for BIONIK barrier.
KT239
Kit DIN rail with magnetic support.
BAMS/01/EXT
Extension 20cm for mobile support BAMS/01.
B73/EXP
Signal status board, 2 output for CTRL – CTRL/P
KT242
Cable passage kit, with magnetic support, for barriers.
CRA/BAR
Post for photocells G90/F2ES – G90/F4ES – for spaced installation on a barrier cabinet (+23cm).
SP/85/AS/02
Assembly 2 spring diameter 85 mm for barriers.
BA/128/4
White painted aluminum rod, 4 meters long, with LED cover profile and impact resisteng rubber profile.
JNT/BA/128
Internal boom bar joint in anodized aluminum including fixing screws for bars BA/128.